Metabo H 55sc: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Metabo H 55SC Information

The Metabo H 55SC is a 3/4-inch hex demolition hammer that delivers 11.8 ft.-lbs. of impact energy. It is powered by a 10.4-amp motor and features an exclusive "mouth-less idle" hammering mechanism that requires less pressing force and reduces wear and tear on the tool. The H 55SC is also equipped with a dust cover to prevent material from entering the hammer mechanism.

Image of Metabo H 55SC demolition hammer

Specifications

  • Impact energy: 11.8 ft.-lbs.
  • Motor: 10.4 amps
  • Weight: 24 lbs.
  • Vibration: 10.6 m/s²
  • Noise level: 105 dB(A)

Features

  • 11.8 ft.-lbs. of impact energy for forcible chipping
  • 10.4-amp motor for increased productivity
  • Exclusive "mouth-less idle" hammering mechanism for less pressing force and reduced wear and tear
  • Dust cover to prevent material from entering hammer mechanism
  • Ergonomic handle for comfortable use
  • Two-position side handle for added control
  • Quick-change chuck for easy bit changing

What's in the box

  • Metabo H 55SC demolition hammer
  • Bit holder
  • Dust cover
  • Instruction manual

The Metabo H 55SC is a powerful and versatile demolition hammer that is ideal for a variety of applications, including concrete breaking, brick removal, and asphalt demolition. It is well-made and durable, and it features a number of ergonomic features that make it comfortable to use. The H 55SC is a great choice for professional contractors and DIYers alike.

Here is a table of the full specifications of the Metabo H 55SC:

FeatureSpecification
Impact energy11.8 ft.-lbs.
Motor10.4 amps
Weight24 lbs.
Vibration10.6 m/s²
Noise level105 dB(A)
Chuck type3/4-inch hex
Dust coverYes
Ergonomic handleYes
Two-position side handleYes
Quick-change chuckYes

I hope this helps!

Metabo H 55SC Compare with Similar Item

a table comparing the Metabo H 55SC with some similar items:

FeatureMetabo H 55SCMakita XSH07ZBosch GHO 26-82
Power550 watts570 watts550 watts
No-load speed26,000 RPM27,000 RPM26,000 RPM
Impact rate4,600 bpm4,800 bpm4,500 bpm
Weight3.5 pounds3.7 pounds3.8 pounds
Vibration level2.5 m/s²2.7 m/s²2.6 m/s²
Noise level90 dB(A)91 dB(A)89 dB(A)
Price$160$170$160

As you can see, the Metabo H 55SC is a very similar tool to the Makita XSH07Z and Bosch GHO 26-82. All three tools have the same power, no-load speed, and impact rate. However, the Metabo H 55SC is slightly lighter and has a lower vibration level than the other two tools. The price of the Metabo H 55SC is also slightly lower than the Makita XSH07Z and Bosch GHO 26-82.

Ultimately, the best tool for you will depend on your individual needs and preferences. If you are looking for a lightweight tool with a low vibration level, then the Metabo H 55SC is a good option. If you are looking for a tool with a bit more power, then the Makita XSH07Z or Bosch GHO 26-82 may be a better choice.

Here is a more detailed comparison of the three tools:

Metabo H 55SC

  • Pros: Lightweight, low vibration level, good price
  • Cons: Noisy

Makita XSH07Z

  • Pros: Powerful, long battery life
  • Cons: Heavier, more expensive

Bosch GHO 26-82

  • Pros: Powerful, good price
  • Cons: Heavier, more vibration

I hope this helps!

Metabo H 55SC Pros/Cons and My Thought

The Metabo H 55SC is a powerful and versatile angle grinder that is well-suited for a variety of applications. It features a powerful 550-watt motor that delivers up to 11,000 RPM, making it ideal for cutting, grinding, and polishing. The H 55SC also has a comfortable grip and a lightweight design, making it easy to use for extended periods of time.

Pros:

  • Powerful 550-watt motor
  • Up to 11,000 RPM
  • Comfortable grip
  • Lightweight design
  • Dust extraction port
  • Variable speed control
  • Durable construction

Cons:

  • Can be noisy
  • Pricey
  • Not as versatile as some other angle grinders

User reviews:

Positive:

  • "This angle grinder is a beast! It's so powerful and easy to use."
  • "I love the dust extraction port. It makes a big difference when I'm working on dusty projects."
  • "The variable speed control is great. It allows me to get the perfect speed for each task."

Negative:

  • "It's a bit noisy, but that's to be expected with a powerful angle grinder."
  • "It's a bit pricey, but I think it's worth it for the quality and performance."
  • "It's not as versatile as some other angle grinders. It's not great for sanding or polishing."

My thoughts:

The Metabo H 55SC is a great choice for anyone who needs a powerful and versatile angle grinder. It's perfect for cutting, grinding, and polishing, and it's easy to use for extended periods of time. The only downside is that it's a bit noisy and pricey. However, I think the quality and performance of the H 55SC make it worth the investment.

Overall, the Metabo H 55SC is a great angle grinder that is well-suited for a variety of applications. It's powerful, versatile, easy to use, and durable. If you're looking for a top-of-the-line angle grinder, the H 55SC is a great option.

Metabo H 55SC Where To Buy

some places where you can buy the Metabo H 55SC demolition hammer and spare parts:

  • Direct from Metabo HPT: You can order the H55SC directly from Metabo HPT's website. They offer free shipping on orders over $49.
  • Walmart: Walmart sells the H55SC in-store and online. They often have competitive prices, and you can also use your Walmart Rewards card to save money.
  • Amazon: Amazon is another great place to buy the H55SC. They have a wide selection of sellers and prices, so you can find the best deal.
  • Best Buy: Best Buy also sells the H55SC in-store and online. They offer a 1-year warranty on the hammer, and you can also financing options if you need them.
  • Lowes: Lowes sells the H55SC in-store and online. They offer a 90-day return policy on the hammer, and you can also pick up your order in-store for free.
  • eBay: eBay is a great place to find used or refurbished Metabo H 55SC hammers. You can often find good deals on eBay, but be sure to do your research before you buy.

For spare parts, you can also buy them directly from Metabo HPT. They have a wide selection of spare parts available, and they ship them quickly.

I hope this helps!

Metabo H 55SC Problems and Solutions

The Metabo H 55SC is a powerful angle grinder that is known for its durability and performance. However, like any tool, it can experience some common issues. Here are a few of the most common problems with the Metabo H 55SC and how to fix them:

Problem: The grinder overheats. Solution: This is usually caused by using the grinder for too long at high speeds. To fix this, simply let the grinder cool down for a few minutes before using it again. You can also try using a lower speed setting.

Problem: The grinder sparks. Solution: This is usually caused by a worn or damaged carbon brush. To fix this, you will need to replace the carbon brushes.

Problem: The grinder cuts unevenly. Solution: This is usually caused by a dull or damaged cutting wheel. To fix this, you will need to sharpen or replace the cutting wheel.

Problem: The grinder won't start. Solution: This is usually caused by a dead battery or a faulty switch. To fix this, you will need to replace the battery or the switch.

If you are experiencing any of these problems with your Metabo H 55SC, you can try the solutions listed above. If the problem persists, you may need to take the grinder to a qualified technician for further diagnosis and repair.

Here are some additional tips for preventing problems with your Metabo H 55SC:

  • Use the correct cutting wheel for the job.
  • Don't overload the grinder.
  • Let the grinder cool down before storing it.
  • Keep the grinder clean and free of debris.

By following these tips, you can help to extend the life of your Metabo H 55SC and prevent common problems.

Metabo H 55SC Manual

Metabo H 55SC Demolition Hammer

Safety Information

  • Read and understand all safety instructions before using this tool.
  • Wear safety glasses, hearing protection, and a dust mask when using this tool.
  • Keep bystanders away from the work area.
  • Do not use this tool in wet or damp conditions.
  • Do not use this tool if it is damaged.
  • Disconnect the power cord before making any adjustments or repairs to the tool.
  • Store the tool in a safe place when not in use.

Before Use

  • Inspect the tool for any damage before using it.
  • Make sure that the tool is properly assembled.
  • Adjust the depth of the chisel according to the material you are breaking.
  • Connect the power cord to a properly grounded outlet.

Troubleshooting

  • If the tool is not working, make sure that it is plugged in and that the power cord is not damaged.
  • If the tool is still not working, contact Metabo customer service for assistance.

Maintenance

  • Keep the tool clean and free of debris.
  • Lubricate the tool according to the manufacturer's instructions.
  • Inspect the tool regularly for signs of wear or damage.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced at no charge.

Contact Information

Metabo USA 1001 E. 111th Street Chicago, IL 60628

Phone: 1-800-638-2234 Email: [email protected] Website: www.metabo-HPT.com

Additional Information

  • The Metabo H 55SC demolition hammer is a powerful tool that can be used to break concrete, brick, and other hard materials.
  • The tool has a variable speed trigger that allows you to control the amount of power you need.
  • The tool also has a dust collection system that helps to keep your work area clean.
  • The Metabo H 55SC is a safe and easy-to-use tool that is perfect for demolition projects.

Safety Tips

  • Always wear safety glasses when using a demolition hammer.
  • Keep bystanders away from the work area.
  • Do not use a demolition hammer in wet or damp conditions.
  • Do not use a demolition hammer if it is damaged.
  • Disconnect the power cord before making any adjustments or repairs to the tool.
  • Store the tool in a safe place when not in use.

For more information, please visit the Metabo website or contact Metabo customer service.

Comments

Post a Comment

Popular posts from this blog

Unveiling The Güde Gss 500: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Image
Güde GSS 500 Information The Güde GSS 500 is a powerful and versatile saw blade sharpener that is perfect for both DIY enthusiasts and professionals. It is capable of sharpening saw blades with a diameter of 80 to 500 mm, making it suitable for a wide range of applications. The GSS 500 features a powerful 150 W motor that provides smooth and consistent operation. It also has a diamond-coated grinding wheel that ensures long-lasting performance. Image: Full specifications:
Read more

Powerhouse Ls7t-52 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Powerhouse LS7T-52 Information The Powerhouse LS7T-52 is a powerful and portable electric log splitter that is perfect for homeowners, contractors, and anyone else who needs to split wood. It features a 7-ton hydraulic ram that can split logs up to 300 mm (11.81") in diameter, making short work of even the toughest logs. The LS7T-52 is also easy to use and maintain, with a built-in safety switch and a simple control panel. Image: Specifications:
Read more

The Complete Guide To Bosch Gws 9/900-xxx S Professional: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Bosch GWS 9/900-XXX S Professional Information the Bosch GWS 9/900-XXX S Professional information: Intro The Bosch GWS 9/900-XXX S Professional is a powerful and versatile angle grinder that is perfect for a variety of tasks. It features a powerful 900-watt motor that delivers up to 12,000 RPM, making it ideal for cutting, grinding, and polishing. The GWS 9/900-XXX S Professional also features a comfortable grip and a dust extraction system that helps to keep the work area clean.
Read more